TES 100

The TES-100 Stereo Kit is designed for those who demand the very best. It adds an unbelievably accurate, powerful, and uniform tactile effect to all types of couches. The TES-100 Stereo Kit delivers "stereo" motion effects. Watching a powerful stock car zoom from left to right across your display now means FEELING the ground-quaking engine racing from left to right in your seat! For those home theater enthusiasts who require high power output and have the highest standards, the TES-100 Stereo Kit is a necessity.

The TES-100 remains true to the artistic content of movies and music. It delivers the low frequency content in an accurate, natural and powerful way.

Crowson's TES-100 Stereo Kit can be installed by a person with no mechanical skill in less than 15 minutes. No modifications to furniture or flooring are required. The system easily interfaces with standard audio equipment using conventional audio signals.

The TES-100 Stereo Kit includes :

* 2 TES Transducers - The TES Transducer is a patent pending electromagnetic actuator specifically designed to deliver extraordinarily accurate low frequency motion to a wide range of furnishings. The Transducer is constructed with the highest standards. From the rare earth magnet actuator to the grained and anodized aluminum cover, the TES 100 Transducer is pure quality.

* 2 Motion Isolators - The Motion Isolators dramatically reduce the amount of tactile energy transmitted to the floor and surrounding environment. They effectively isolate the tactile sensation to the couch or chair. The Motion Isolators are made of a high quality mark-free rubber.

The TES 100 Stereo Kit requires:

* Stereo amplifier - A wide variety of two-channel (stereo) amplifiers will work to power the two (2) TES 100 Transducers. We recommend a DEDICATED amplifier that can produce 50 to 500 Watts per channel with a 6 ohm load. It is also useful to have volume or gain control and line level pass throughs. We highly recommend: Crowson A200 TES Stereo Amplifier

* RCA Y adaptors and cables - RCA male-to-two female Y adaptors may be necessary if your amplifier does not feature line level pass throughs. Standard audio RCA cables can be used. In many cases a two channel cable can be separated to yield two mono RCA cables. (See installation manual for specific requirements.)

* Speaker wire - Standard audio speaker wire should be used to deliver power from the amplifier to the TES 100 Transducers. We recommend wire size 18 AWG or larger.

The TES 100 is also available in a mono configuration.



	TES 100
How It Works TES 100 Manual TES 100 Specifications Latest Review
	The TES-100 Stereo Kit is designed for those who demand the very best. It adds an unbelievably accurate, powerful, and uniform tactile effect to all types of couches. The TES-100 Stereo Kit delivers "stereo" motion effects. Watching a powerful stock car zoom from left to right across your display now means FEELING the ground-quaking engine racing from left to right in your seat! For those home theater enthusiasts who require high power output and have the highest standards, the TES-100 Stereo Kit is a necessity. The TES-100 remains true to the artistic content of movies and music. It delivers the low frequency content in an accurate, natural and powerful way. Crowson's TES-100 Stereo Kit can be installed by a person with no mechanical skill in less than 15 minutes. No modifications to furniture or flooring are required. The system easily interfaces with standard audio equipment using conventional audio signals. The TES-100 Stereo Kit includes : * 2 TES Transducers - The TES Transducer is a patent pending electromagnetic actuator specifically designed to deliver extraordinarily accurate low frequency motion to a wide range of furnishings. The Transducer is constructed with the highest standards. From the rare earth magnet actuator to the grained and anodized aluminum cover, the TES 100 Transducer is pure quality. * 2 Motion Isolators - The Motion Isolators dramatically reduce the amount of tactile energy transmitted to the floor and surrounding environment. They effectively isolate the tactile sensation to the couch or chair. The Motion Isolators are made of a high quality mark-free rubber. The TES 100 Stereo Kit requires: * Stereo amplifier - A wide variety of two-channel (stereo) amplifiers will work to power the two (2) TES 100 Transducers. We recommend a DEDICATED amplifier that can produce 50 to 500 Watts per channel with a 6 ohm load. It is also useful to have volume or gain control and line level pass throughs. We highly recommend: Crowson A200 TES Stereo Amplifier * RCA Y adaptors and cables - RCA male-to-two female Y adaptors may be necessary if your amplifier does not feature line level pass throughs. Standard audio RCA cables can be used. In many cases a two channel cable can be separated to yield two mono RCA cables. (See installation manual for specific requirements.) * Speaker wire - Standard audio speaker wire should be used to deliver power from the amplifier to the TES 100 Transducers. We recommend wire size 18 AWG or larger. The TES 100 is also available in a mono configuration.
	For all enquiries call 020 7100 2034	Back
	© 2006 Stockbury Ltd. SIte by putITout